TEE GRID SYSTEM

We are outstanding performers in providing an advanced range of high quality Tee Grid System in         38 mm / 32mm, which is extensively used to suspend lay-in ceiling tiles and mineral fiber ceiling tiles to the ceiling. In addition, these durable systems are fabricated in our highly sophisticated manufacturing unit in order to meet the set quality standards.

We are renowned manufacturers and suppliers of Grid Suspension System. This system is fabricated using premium quality raw material, which is procured from our trusted sources. Additionally, our range is highly appreciated for its long life. This high quality durable system is available in the market at reasonable prices.

Features:

  • It shall be an exposed lay-in system to fit 600 mm x 600 mm or 600 mm x 1200 mm ceiling modules
  • It shall be suspended By a 4mm diameter adjustable quick fit hanger rod system. Main Tee shall be in 38mm/33mm and the height exposed portion (polyester coated) shall be 24mm
  • Cross tee shall be 26mm height and expose portion shall be 24mm. All system components are made of roll formed hot dipped galvanized steel of 0.30mm thickness with zinc coating of not less than 120g/m2 and a minimum tensile strength of 240 MPA
  • Wall angle is 24mm height x 24mm width and expose portion is made of 0.40mm thick pre coated coil. Both ends of the Main Tee have integral splices, which can be enjoined firmly be inserting a tab on the one end of one section into the slot in the adjoining section
  • The exposed flange finish shall be pre painted polyester coated galvanized steel, not less than 0.30 in off-white color with a coating thickness of 20 microns top coat and 8 microns primer alkyd backer on backside. The main runner has fire notches to sustain the grid system during fire.

Specialties for T-Grid System:

  • Steel material is processed by pre painted hot-dip galvanized
  • Zinc Mass Coating is 120 gm/m2
  • Salt spray test for the white pre-painted cap is for 300 Hours.
  • The Material is processed with 20 micron polyester pre-painted
  • The anti-rust process has been incorporated into the galvanized steel
  • T-bars are produced by a fully automatic machine controlling the production of straight material to maximum 0.1 mm tolerance ensuring consistent dimensioning of the grid module after installation.
  • Load bearing capacity when the span is 1.2 meter, supported with hanger wire from roof for type I is 8.45 kg/m2 and for type II is 12.05 kg/m2

Advantages:

It is economical, easy to install and uses less labour to complete the installation in a minimum time frame as compared with conventional extruded aluminum tee system. Interchangeability of main and cross tees between systems promotes lower inventory requirements and greater field flexibility. The straight entry locking feature of the section allows the system to be installed easily within close proximity of the overheads. The system promotes complete design flexibility and is capable of sustaining loads normally designed into the suspended tee system (refer to load table). Overlap type of cross tee provides complete flush joint, eliminating gaps between main runner and cross tees and ensures rigidity at fixtures. In-line cross tees provide true double-lock action.

X